1-800-653-6069
CALL TOLL FREE
Kenco
1-800-653-6069
Ligonier, PA
Quick Links to our incredible lifting tongs and attachments.
LIFTING ATTACHMENTS:
ATTACHMENTS FOR:
WHEEL LOADER SNOW PLOWS & BLADES
Attachments for snow removal operations. When the climate drops to the low end, Kenco runway plows, snow plows, and snow blades provide you with items built for the demanding production life you expect out of all of your equipment.
FOR SNOW REMOVAL OPERATIONS
Kenco is your number one choice when it comes to attachments.
SNOW BLADE
The Kenco Snow Blade makes short work for snow removal in parking lots, driveways, and sidewalks. (shown at right)
Snow Blade Specifications
Model # Blade Desc. Cylinders Mounting Blade Parts Trip Mech. Max Angle/
Coverage
SB 10 120" x 36" 2 x 3" Pin-On or Curb Protectors, 2 Trip Mech. 30 degrees; 104"
QC w/ Tie Rods Corner Flags 4 Springs
SB 12 144" x 48" 2 x 3" Pin On or Curb Protectors, 2 Trip Mech. 30 degrees; 104"
QC w/ Tie Rods Corner Flags 4 Springs
SB 14 168" x 54" 2 x 4" Pin On or Curb Protectors, 2 Trip Mech. 30 degrees; 104" QC w/ Tie Rods Corner Flags 4 Springs
RUNWAY PUSHER
left: The Kenco Runway Pusher clears snow from airport runways. They are available in "straight blade" design and are manufactured in 5-foot increments starting at 15 feet up to 30 feet. It utilizes bolt-on wings on each end of the blade to eliminate windrows, PLUS a rubber flap bolted to the top of the blade to prevent "blow-over" of snow that affects operator visibility during high speed clearing.
- Lengths of 15 to 30 feet (in 5 foot increments)
- Bolt-on wings for blade ends Increases plowing capacity
- Top blade rubber flap prevents “blowover”
- Reinforced by vertical and horizontal moldboard ribs
- Wear resistant drilled base edge
- Bolt-on moldboard end plates
- Proven moldboard curvature
ATTACHMENT SOLUTIONS
ROCK SOLID
RIGGING HARDWARE
