1-800-653-6069
CALL TOLL FREE
PIPE LIFT
Kenco
1-800-653-6069
Ligonier, PA
Quick Links to our incredible lifting tongs and attachments.
LIFTING ATTACHMENTS:
- PIPE LIFT
ATTACHMENTS FOR:
These pipe tongs are the safest, most cost-effective way to move concrete, metal, or plastic pipe. Our exclusive actuator uses the power of gravity to allow the scissor action of the pipe tongs to clamp securely on PVC, iron, or concrete pipe. If you move pipe using straps or teacups, the Pipe Lift attachment will make a definite impact in your productivity. The operator is able to use the pipe tongs to grab, lift, and move pipe without assistance.
Doubles your production output versus the sling and chain methods. The pipe tongs unique, wide scissor-grip design enables a stable lift to be achieved even when the pipe has been picked off-center. This eliminates the need to position a sling dead-center. Models are available in semi automatic and fully automatic models.
"We use the Pipe Lift for every underground job we do. It has increased productivity and safety. We have tried other brands of pipe lift in the past, but yours does not damage the pipe. It gives a much more secure lift. It is an excellent product. We also use the Kenco Barrier Lifts."
Waldy Poliem, Westwind Contracting, Inc., Pembroke Park, FL
- The heavier the pipe, the tighter and stronger the grip.
- Narrow profile of the pipe tongs eases removal from tight trenches.
- Unique design allows for lifting a wide range of pipe sizes with each model.
- No additional hydraulics are required.
SPECIFICATIONS
Use diagram at right for
A, B, C, D, E measurements in specification chart below.
Sizes are shown in inches. Range is listed for each model under type of pipe. There may be pipe not listed. Pipe OD and weight are the determining factors for choosing the correct lifter.
MODEL# OD RANGE PVC,STEEL DI, C900 PVC RCP CAPACITY lbs/kg C D E WEIGHT lbs/kg
30 inch width, two tine models
PL1500 4.5 - 9.05 4/4.50 4/4.80 n/a 1500 / 680.4 25.75 19.25 11.75 160 / 72.57
6/6.63 6/6.90
8/8.63 8/9.05
PL2000 8.63 - 13.20 8/8.63 8/9.05 n/a 2000 / 907.2 29 22 16 180 / 81.65
10/10.75 10/11.10
12/12.75 12/13.20
PL2150 10.75 - 15.30 10/10.75 10/11.10 n/a 2150 / 975.2 35 26 17.5 230 / 104.3
12/12.75 12/13.20
14/14.00 14/15.30
PL2250 12.75 - 17.40 12/12.75 12/13.20 12/16.00 2250 / 1021 37.25 32 18.75 330 / 149.7
14/14.00 14/15.30
16/16.00 16/17.40
PL2500 14.00 - 23.00 14/14.00 14/15.30 12/16.00 2500 / 1134 43.5 35.75 25.25 380 / 172.4
16/16.00 16/17.40 15/19.50
18/19.50 18/23.00
20/21.60
PL2750 18.00 - 25.80 18/18.00 18/19.50 15/19.50 2750 / 1247 46.5 38.5 28.25 410 / 186
24/24.00 20/21.60 18/23.00
24/25.80
PL3000 23.00 - 32.00 24/24.00 24/25.80 18/23.00 3000 / 1361 52.75 48 33.25 530 / 240.4
30/30.00 30/32.00 21/26.50
24/31.50
PL3500 30.00 - 38.50 30/30.00 30/32.00 24/31.50 3500 / 1588 52.75 54.75 41 580 / 263.1
36/36.00 36/38.30 27/35.00
30/38.50
PL4500 36.00 - 45.50 36/36.00 36/38.40 30/38.50 4500 / 2041 66.5 72 50 1250 / 567
42/42.00 42/44.50 36/45.50
36 inch width, two tine models
PL7000 42.00 - 52.50 42/42.00 42/44.50 36/45.50 7000/3175 72.75 74.5 55.25 1500 / 680.4
48/48.00 48/50.80 42/52.50
PL8500 48.00 - 59.50 48/48.00 48/50.80 42/52.50 8500/3856 77 84.5 62.75 1700 / 771.1
54/54.00 54/57.56 48/59.50
FULLY AUTOMATIC OPERATION SEQUENCE
SEMI- AUTOMATIC OPERATION SEQUENCE
1
1
2
2
3
3
4
4
Lifter is latched in open position, ready to lower onto load.
Operator rests lifter on load, which causes actuator to release.
Operator raises hook, causing lifter to grip automatically.
Load is moved to destination and lowered. The operator again rests the lifter on the load, which causes the actuator to automatically latch.
Lifter is latched in open position, ready to lower onto load.
Operator rests lifter on load.
Helper lifts latched handle, Operator raises hook, causing lifter to grip the load.
Load is moved to destination and lowered. The operator again rests the lifter on the load, which causes the lifter to automatically latch.
Automatic models are operated from the cab, while semi-automatic models must be activated by a ground assistant
above: shown with two tines.
left: shown with three tines
as part of the pipe tongs for larger capacity lifting
ATTACHMENT SOLUTIONS
ROCK SOLID
Features of Kenco's Pipe Tongs
RIGGING HARDWARE
Sling Assembly
RigMAX contains everything you need to attach the Kenco Pipe Lift to any machine in less than 1 minute. Includes one extra tough round sling and two alloy screw pin anchor shackles.
NEW! Interactive Model
